A Pop-Up Valentine With a Cupid Angel Inside a Heart Sliceform

A Pop-Up Valentine With a Cupid Angel Inside a Heart Sliceform

This pop-up Valentine can fold flat and will fit into an A7 envelope.  Please note, the receiver of this Valentine will have to insert the tab into the slot in the hexagonal base. 

Here is the PDF file.  I use 65 lb. Neenah White Gold cardstock from Office Depot.

https://drive.google.com/file/d/1Mf9RtTls9TuNMw_PMwsblu-VoMEkVBBb/view?usp=sharing

Here is the .Studio file.

https://drive.google.com/file/d/1RddYFNjfVJq4IPtHqixO_b1dz_TCKonK/view?usp=sharing

Here is the SVG.

https://drive.google.com/file/d/1rMMsTS9-hkq0bCTBLy2guYXzcWl_ypn6/view?usp=sharing

Glue the embellishments on Cupid and the heart. (The heart swirl is not shown.  I decided to add this embellishment after the photo was taken.)

Glue the reinforcement tab onto each side of the base.  Align all the edges.

Slide the two center slices into one another.

Attach all of the inner slices.  These are the slices with the tabs inside the heart.

Fold the slices flat to make sure that everything is aligned properly.

Attach all of the outer slices.

Make the base.

 The directions to make this hexagon base is in this blog posting. https://papercraftetc.blogspot.com/2020/12/a-peace-dove-pop-up.html