A STEM Project: Making a Slice Form Snow Globe Christmas Ornament

Slice Form Snow Globe with Hanger for the Christmas tree.  

This is also suitable for mailing as it can lie flat.

Using the four inch slice form snow globe that was created here, https://papercraftetc.blogspot.com/2020/10/a-stem-project-how-to-make-slice-form.html.  Add a hanger to the top of the slice form to make a way to hang the ornament on the tree.

The steps to make a hanger are as follows: 1. Make an oval.  2. Go into point editing mode, delete the bottom most point and make the line flat at the bottom 3. Make a rectangle and place it by the half of and oval 4. Offset the two with a distance of 0.100 in. The inner rectangle can be deleted. 5. Center the hanger to the top of the four inch inner slice form and Weld it to the slice form

Steps to Add a Hanger to the Slice Form Snow Globe

At this point scenery can be added to the inside of the snow globe.  It can be done with the directions from this posting. https://papercraftetc.blogspot.com/2020/10/a-stem-project-adding-scenery-to-slice.html

Here is the PDF.

https://drive.google.com/file/d/1_UR8xoGD6iKdorOEjb0BMM9MECyq7fwa/view?usp=sharing

Here is the .Studio file.

https://drive.google.com/file/d/1-Z_aobaV02OPRwvSZeoa9Smw1itYqVeM/view?usp=sharing

Challenge yourself and make your own hanger design such as a circle, diamond or other shape.

Center slice with a hanger

To assemble this slice form, use the instructions at the end of this blog posting. Replace the one center slice with the one made here. https://papercraftetc.blogspot.com/2020/10/a-stem-project-how-to-make-slice-form.html