Saturday, November 16, 2019

A STEM Project: A Moravian Star Model


A Moravian Star


I have always been fascinated by the look of the Moravian star. I love the way that the pyramids radiate from the center. I guess it appeals to my mathematical side.  In fact, the origin of this design originated as a geometry lesson in a Moravian Boys school in Niesky, Germany in the 1830's.  Students would make shapes out of paper and glue them together. The results were stellations or stars. This star was adopted by the Moravian Church as an advent symbol and is commonly used in nativity scenes to represent the star of Bethlehem. Traditionally, the star is hung the first Sunday of Advent and remains up until Epiphany, January 6, or the time of the coming of the Magi.

This Moravian star is a 26 point star. It has 18 large points and 8 small points. It is built on a base which is a rhombicuboctahedron. A rhombicuboctahedron is an Archimedean solid with eight triangular faces and eighteen square faces.

Here is the PDF file.  I used 65 lb. cardstock.
https://drive.google.com/file/d/1JolhWICmJxlC7aen1-CqpDvi4ZjM91Kr/view?usp=sharing

Here is the .Studio file.
https://drive.google.com/file/d/1ihzLN7tdll_koeN4tXdOisMcRKyJxAFp/view?usp=sharing

Here is the SVG.
https://drive.google.com/file/d/1Zc76_nLUyG6wUPGvoS2YpTVVhmX4gF-3/view?usp=sharing

Fold the three strips of paper

Glue them into an octagon.

Apply glue on the two opposite squares of one octagonal strip.  Slip the other octagonal strip over the glued area to form a structure as shown in the photo above. 

Apply glue on the four middle squares as shown above.

Slide the third octagonal strip over the glued areas. This structure is now called a small rhombicuboctahedron

Fold the perforations of the small triangular pyramid. Apply glue on the left side which looks like a triangle. 

Completed small triangular pyramid.  Repeat for the remaining triangular pyramids.

Bend the large square pyramid and apply glue as shown.

Large square pyramid. 

Glue all of the large square pyramids.  If you want to hang up your Moravian star, tape a string in the center of the large square pyramid.

Glue the large square pyramid closed and allow the string to protrude from the center apex of the pyramid.

Completed parts before final assembly.

Glue the large square pyramid to the top as shown with the tabs attached to the adjacent squares. Glue another large square pyramid to the bottom.

Repeat gluing the large square pyramids to the four cardinal points as shown. 

Using the large square pyramid, bend two of the tabs inward and the opposite tabs outward. Apply glue to the tabs as shown above.

The two outward tabs will be bent under the small rhombicuboctahedron.  In other words, every spot where there is a square next to an open triangle, you will use this method of attaching the large square pyramid. Notice in the above photo, the tabs are attached inside the small rhombicuboctahedron.   Repeat until all of the large square pyramids are attached.

Here is a photo of all the large square pyramids attached. The only thing left to do is attach the small  triangular pyramids.

Apply glue to the triangular pyramid tabs and insert it into the open equilateral triangle. Repeat for the other triangular pyramids.

Completed Moravian Star



After completing the Moravian Star, you might like to try my next model, the Bethlehem Star. https://papercraftetc.blogspot.com/2019/11/a-stem-project-bethlehem-star-model-and.html  It uses the same construction as the Moravian Star but the pyramid sizes vary.

24 comments:

  1. Thank you!❤️ That's amazing. Just made in and ist looks beautiful😍

    ReplyDelete
  2. These are great! Can you include your blog name/address on the silhouette file so when i open it i can find the instructions again? thanksso much for sharing!!

    ReplyDelete
  3. Replies
    1. I am so glad that you are enjoying the challenge. It will look amazing once it is completed!

      Delete
  4. i have to do this for school. its amazing

    ReplyDelete
    Replies
    1. I am glad that you think this is an amazing project. The Moravian Star is very mesmerizing to look at, once it is completed.

      Delete
  5. could you please tell me if i can make your stars without using a cutting machine. also what is the actual size of the squares in the strips .thank you.

    ReplyDelete
    Replies
    1. Yes, you can cut out the stars and score the dotted lines to make the stars. Print the PDF on 65 lb. cardstock. The squares on the strip are 1 inch.

      Delete
  6. Struggled with making the flaps stick especially on the inside. However it is a fun project and will do nicely for my presentation modle

    ReplyDelete
    Replies
    1. I am sorry to hear that the flap was difficult to glue. Maybe a different glue would work...I use Aleene’s Tacky glue. You might also try a Glue Dot for difficult areas.

      Delete
  7. i love your Bethlehem star model and i hope to try this traditional one too. i love the mathematics behind the star as well

    ReplyDelete
  8. Would you be able to post an SVG file? We are hoping to make these for a ladies craft night at my church and I want to save some of the older ladies from having to cut a lot.

    ReplyDelete
  9. Thanks so much for this pattern. What is the size of your 65# card stock? 8x11 or another size?

    ReplyDelete
  10. What is the original paper size, 8x11 or another? Thanks for the pattern.

    ReplyDelete
  11. Is there a pdf with your instructions? I'd like to save them to my computer for future reference.

    ReplyDelete
    Replies
    1. Copy and paste the blog entry into a Word document and then save it.

      Delete