Easter Bunnies That Rotate Around a Cherry Tree With a Gear

Easter Bunnies That Rotate Around a Cherry Tree With a Gear

The cherry blossoms have arrived. My trees are in peak bloom and I wanted to create a scene depicting Easter Bunnies running around my cherry tree looking for Easter eggs.  The father and mother bunnies found some Easter eggs and their two children are scurrying around the tree in search of more eggs. 

The Easter Bunny family is attached to a gear which rotates when the gear is moved.  The cherry tree is stationary and is attached to a octagonal box. The box can be filled with Easter candy for gift giving.

Here is the PDF.  I used 65 lb. cardstock.

https://drive.google.com/file/d/1LRygIjO3P0ATRQyhDWQaajKA6v6IoV-e/view?usp=sharing

Here is the .Studio file.

https://drive.google.com/file/d/1PNWFlmUYeLCzHj16YA5-LLI8cHxQi55D/view?usp=sharing

Here is the SVG.  The file extends beyond the scope of the viewing field.  Zoom out to see the entire file.

https://drive.google.com/file/d/16OepFMQ5PN9otsCAouvB3u6kJF2MWhB_/view?usp=sharing

There are three sizes of pink flowers.  I recommend cutting the flowers in four passes because there are so many flowers to glue onto the cherry tree. The medium size flowers are glued onto the tree first and then the small and large flowers.  

Cut and repeat for the other three sides of the two trees. 

Slide the cherry tree pieces together to form a 3D cherry tree.

Glue the same size bunnies together. In the photo above the mother bunny is complete.  The girl bunny needs to be sandwiched together with the pink piece glued to the center.

Repeat for the father and boy bunny.

Insert the tabs of the bunny into the gear with the set of four small holes. 

Splay the tabs and glue them down for each of the bunnies.

Glue the four gear axles together.

Insert the tabs of the cherry tree into the gear axle with the four slits.

Splay the tabs and glue them down as shown above.

Apply glue to the axle and adhere the set of four axles.

There will be a slight overhang.  Make sure that the overhang is centered.

Glue on the flowers to the outer gear casing.

Glue the outer gear casing to the gear axle and casing template.

Glue the three gears together to create a sturdy gear that will rotate without warping.

Place the gear on top of the outer gear casing assembly.  Make sure that the gear will move freely on the green axle.

Place the outer gear casing with the flowers on top of the assembly. Apply glue to the cherry blossom base and adhere the cherry tree to the center of the assembly.

Glue the outer gear casing to the tabs of the outer gear casing with flowers.

Glue opposite sides together so that the casing is centered correctly. Repeat for the tabs.

The gear assembly is now complete and the gear should move freely.

Crease the bottom of the box as shown above.

Glue the tabs of the sides together and apply glue to the inner tabs of the box. Adhere the bottom of the box to the tabs.

Turn the box over and apply glue to the tabs.  Adhere the bottom of the box.  The box is two walled to make a sturdy box.

Repeat for the top of the box. Glue the sides together and apply glue to the interior tabs.  Adhere the top of the box.

Turn the top of the box over and apply glue to the tabs.  Adhere the top of the box.

Apply glue to the top of the box. Adhere the gear assembly to the top.

Make sure the gear assembly is centered correctly.

Completed Easter Bunnies and Cherry Blossom Tree

A STEM Project: Galileo's Parabolic Experiment - Part #1

Galileo's Parabolic Experiment

Slow Motion Video of the Marble Rolling Down the Ramp and Through the Loops

In the late 1590's, Galileo studied the physics of motion made popular by Aristotle at the University of Pisa.  He then went on to teach at the University of Padua where he contradicted Aristotle's theory of projectile motion.  He proved that motion exerts forces on the projectile in two directions, vertically and horizontally at the same time.  He proved these results physically by rolling a metal ball down an inclined plane and allowed it to roll off the end to complete its fall. He also proved it mathematically with equations and visually by seeing that these forces create a curve which has the same exact mathematical shape as a parabola. 

In this blog posting, I recreate Galileo's parabolic experiment using an assembly similar to the following apparatus. (My files contain all of the necessary components to make the apparatus in paper.  It can easily be cut by hand, Silhouette, Cricut or another die cutting machine.)

At the Galileo Museo in Italy there is an apparatus which can demonstrate Galileo's theory of parabolic trajectory of projectiles.

Here is its description from the museum catalog. https://catalogue.museogalileo.it/object/ApparatusToDemonstrateParabolicTrajectoryProjectiles.html

"The apparatus was probably first described by Willem Jacob 's Gravesande in Physices elementa mathematica, experimentis confirmata (3rd ed., Leiden, 1742). It demonstrates experimentally that gravitational acceleration causes a body launched horizontally to describes a parabolic trajectory.

A wooden base, fitted with leveling screws, holds a stand with a quarter-circle track and vertical panel on which a series of four brass rings are fixed at equal distances along a parabola. A ball falling down the track experiences a constant acceleration. When no longer supported by the track, the ball's horizontal projection is combined with the natural motion of uniformly accelerated fall; the ball's path thus becomes parabolic, as evidenced by the fact that it goes through the entire series of rings. The experiment confirms Galileo's discovery of the parabolic trajectory of bodies as the result of the combination of horizontal projection and free fall, defined by the Pisan scientist in c. 1609 and first published in the Giornata Quarta [Fourth Day] of the Discorsi and dimostrazioni matematiche intorno a due Nuove Scienze (Leiden, 1638). Provenance: Lorraine collections"

I copied the photo of the apparatus to Silhouette and traced the trajectory (red and blue curves) that the projectile would take.  I confirmed that the two curves were as follows:

The red curve represents Galileo's parabola: Physics tells us the functional form of the parabolic ball flight is y=ax^2. By measuring points on the picture (done in centimeters) and curve fitting we find a=-.041. We also know from physics that a=-g/(2v^2) where v is the velocity vector in the x direction. We find the velocity coming off Galileo’s ramp, after converting units from centimeters, was 3.5 feet/sec.

 The blue line represents the curve that is formed when a circle is divided into fourths.

I created a template of the apparatus with both the red and blue curves and I put red lines where the loops would be. Using this template, I determined my radius of the ramp would be 3.5 inches.  

I used TurtleStitich to create the ramp. The height of the ramp is the radius.

https://www.turtlestitch.org/users/Elaine/projects/Exploring%20Galileos%20Parabolic%20Proof%20-%20Part%20%231

I made a 1 inch circle to simulate the loop in the apparatus in TurtleStitch. 

https://www.turtlestitch.org/users/Elaine/projects/Exploring%20Galileos%20Parabolic%20Proof%20-%20Part%20%232

I made a frame to contain the components of the apparatus in TurtleStitch. 

https://www.turtlestitch.org/users/Elaine/projects/Exploring%20Galileos%20Parabolic%20Proof%20-%20Part%20%233

 Make the Apparatus

Here is the PDF.  I used 65 lb. cardstock, Glue Dots and a marble.

https://drive.google.com/file/d/146oZD8uZ7tPJH_ErCrurAkv7orcgRpXm/view?usp=sharing

Here is the .Studio file.

https://drive.google.com/file/d/1AudhHiyeapyJ5TG3KyvHwAYcioA_1kl_/view?usp=sharing

Here is the SVG.  The file extends beyond the scope of the viewing field.  Zoom out to see the entire file.

https://drive.google.com/file/d/1gTbGFcMBqoCuVxgcqRpBnXTh5igsz8xb/view?usp=sharing

Make the ramp by curving the ramp base and bending the tabs at a right angle (not shown).  Apply glue to each tab and adhere the side of the ramp.  Repeat for the other side of the ramp. Glue the ramp to the template following the blue line.

Glue the four loop pieces into a circle.

Glue to the center of the red line which is perpendicular to the parabola.

Cut the outer black line with scissors.

 Make the Frame

Use the directions from the shuffleboard frame blog posting, https://papercraftetc.blogspot.com/2023/02/a-stem-project-making-shuffleboard-game.html to make the frame.

Assemble the Frame To the Apparatus

Apply glue to the frame.

Apply a few drops of glue to the template. Align the template on the backing and adhere the frame.

Experiment Using a Marble 

Place and release the marble at the top of the blue line. The marble will roll down the ramp.  The red parabolic line represents the path the marble will  take through the four loops.

For more information about Galileo's discovery of the Parabolic Trajectory, please read this Scientific American article, https://www.scientificamerican.com/article/galileos-discovery-of-the-parabolic/

A STEM Project: Making a Variable Size Round Box And Flowers Using TurtleStitch

A Round Box And Flowers Coded In TurtleStitch

In this posting, I have programmed a round box whose size - diameter, height of top and height of bottom can be varied.  Here is the program in TurtleStitch. https://www.turtlestitch.org/run#cloud:Username=Elaine&ProjectName=Round%20Box

I have also programmed two different of flowers whose size and petals can be varied. https://www.turtlestitch.org/run#cloud:Username=Elaine&ProjectName=Flower%20Petals This program generates two types of flowers - one with a flat outer edge and another with a curved outer edge with varying number of petals. Each type of flower can also have their radius and center varied. The n-radius smoothes out the curve of the arc of the round petal.

For those of you who do not want to program, I have included a file for a 3 1/2 inch round box with two different types of flowers.

Here is the PDF.  I used 65 lb. cardstock.

https://drive.google.com/file/d/1l8dv-s7KNbqZFwSeFpKUPnrykpDvjRQX/view?usp=share_link

Here is the .Studio file.

https://drive.google.com/file/d/14S_sqgRc0IMexoJnDaHNF4RxiJ4W22pe/view?usp=sharing

Here is the SVG.  The file extends beyond the scope of the viewing field.  Zoom out to see the entire file.

https://drive.google.com/file/d/1SlXpZW-y4SQdCyuC5mBs7HS0UPf3g2jM/view?usp=sharing

Make the Box

Please note:  the top and bottom of the box are two walled.  This produces a sturdy box.

Glue the strip together to form a loop. Fold the tabs at a right angle to the center of the circle. Repeat for the second strip.  The height of the top of the box is smaller than the bottom of the box.

Apply glue to the inside tabs and adhere the larger circle to form the top of the box. Repeat for the bottom of the box.

Apply glue to the larger circle and adhere it to the top of the box. Repeat for the bottom of the box.

Curl the petals of the flowers as desired.

Glue and adhere to the top of the box.

A STEM Project: Making a Crokinole Game Using a TurtleStitch Created Board Frame

Crokinole is a game where disks are pushed across the game board at a recessed target with concentric circles around it. The target is surrounded by bumpers that deflect the disk.

Crokinole is a fun board game that originated in Canada. The game's name derives from the French word  croquignole which has two meanings, the first is a round pastry similar to a donut and the second meaning is a method of curling.  I believe this is a good name for the game because combining the two definitions explains the concept of the game. It is a round game where wooden pieces are pushed across the surface of the game. Curling is a sport where stones are pushed across the ice at a target with concentric circles around it. 

In this blog posting, I recreated a version of this game using TurtleStitch to create the game board frame.  A collared ball bearing glides across the surface of the board when pushed.   Play alternates between two players pushing their disks across the board to the target. Numbered sections represent the value which is tallied when all of the disks are played. The winner is the player with the most tallied points. Please check the National Crokinole's website for official rules http://nationalcrokinoleassociation.com/resources/rules.html

As I mentioned in a previous blog posting, https://papercraftetc.blogspot.com/2023/02/a-stem-project-making-shuffleboard-game.html , I believe coding a variable size board frame in TurtleStitch is a valuable tool for creating board games which require a ball rolling over a playing field. The possibilities of creating a board game are limitless and are only bounded by your imagination. I used the following TurtleStitch program and modified the side #1 and side #2 values to 8 and 10 inches respectively. to create my crokinole game board frame https://www.turtlestitch.org/run#cloud:Username=Elaine&ProjectName=Shuffleboard

Cut the Crokinole Model Pieces

Here is the PDF.  I used 65 lb. cardstock from Michaels. Six 9mm ball bearings for the shuffleboard weights.

https://drive.google.com/file/d/1OjTYCQ8WFaJMJD8gMaMC-EGK0GmKdao3/view?usp=sharing

Here is the .Studio file.

https://drive.google.com/file/d/1FfBs2-DLNkV0N9o6lkAvK3SFXXxMPpIG/view?usp=sharing

Here is the SVG. The entire design is present.  Zoom out to see the entire file.

https://drive.google.com/file/d/1G94woAJ5B2UZPVSUwBKcOK1s5zJoYSTf/view?usp=sharing

Note: My method of cutting the Crokinole frame is an alternate to scan and cut.

Cut out the outer circle using a waste piece of cardstock. Remove the inner circle. Do not remove the outer cardstock circle.

Print the Crokinole board on your printer. My Epson printer needed to be set to borderless mode to print out the game board. Center and align the outer circle to the underlying cardstock outer circle. Cut the red lines ( the inner circle and bumpers) only with your Silhouette.

Cut the outer rectangle with scissors.  I am sure the Silhouette can do it but I found it easier to cut it myself.

Glue the 20 to the back of the game board.  This creates a ridge for the disk to fall into when a disk slides over.

Make the Bumpers

Apply glue to the tab.

Roll the bumper around a toothpick.

Insert the toothpick into the hole in the game board. Splay the bottom tabs and apply glue to the tabs.  Adhere to the bottom of the game board by...

threading the bumper to the front of the game board and pushing down on the tabbed areas.

Make the Crokinole Frame

Use the directions from the shuffleboard frame blog posting, https://papercraftetc.blogspot.com/2023/02/a-stem-project-making-shuffleboard-game.html to make the frame and the disks (shuffleboard weights).